ASSP Precision Ag's Tips and Techniques

Forum Topics > CaseIH Pro 600 > Card limitations for Pro600 > Post a Reply to this Thread

Card limitations for Pro600

Share/Bookmark: Add this Thread to Digg Digg   Add this Thread to StumbleUpon Stumble Upon   Add this Thread to Del.icio.us Del.icio.us   Add this Thread to Reddit Reddit   Add this Thread to Facebook Facebook
RE: Card limitations for Pro600
by PaulBruns on Wed, Apr 29 2009 7:59 PM
Here is a quote from CaseIH Assist doc that talks about card issues.
"Use a computer to format the card to FAT or FAT16 file system
ATA flash cards and Compact Flash (CF) cards used with AFS / PLM / PFS displays need to be formatted using FAT or
FAT16 file systems.
NOTE: Do not format the card to FAT32 file system. Cards formatted to FAT32 will cause data to be lost."

I have attached a copy of the entire doc.
Quote This Reply
PaulBruns
PaulBruns
Joined: Mon, Apr 27 2009
Location: Canby, MN
Posts: 10
RE: Card limitations for Pro600
by AnthonyBjerke on Wed, Apr 29 2009 5:17 AM
I have ran 1GB in them and until yesterday have had no problems. What are you seeing with the bigger cards?
Quote This Reply
AnthonyBjerke
Joined: Mon, Dec 15 2008
Posts: 2
Card limitations for Pro600
by PaulBruns on Mon, Apr 27 2009 9:35 AM
You can only run 512MB card. If using larger than this there will be problems!
Quote This Reply
PaulBruns
PaulBruns
Joined: Mon, Apr 27 2009
Location: Canby, MN
Posts: 10
Page 1 of 1